instalock-button-ad Quick-Fit Kit, Weaver Snap Davits

Quick-Fit Kit

Installation of the Snap Davit Quick Kit Shoes

Receiver plates for easy removal of the Davit Heads from the swim platform for use with the RBD100 and SSHR for the SD1. Comes with all the mounting hardware plus the pin and lanyard. (Not to be used with RS150)

1/. Simply unbolt the existing davit heads from your swim platform. The Quick Kit plates will cover the old holes.

2/. Drill a 5/8” diameter (approx.) hole about ½” deep. Make sure you seal all holes with caulking to prevent water seepage into the swim platform.

3/. Seal existing mounting holes and mount the Quick Kit plates over them.

4/. Wrap the Quick Disconnect Pin lanyards around the base of each davit head and through the loop so it will not get lost. Slide the davit into the plates and push the pin completely down to the ring. Be sure and store your davit heads in a safe place and please be aware of dropping them in the water.

quickfit-instructions