How to glue Stand Of f Arm Pads to a Dinghy

The rubber pads supplied with the Weaver Snap Davit kit have already been pre-sanded & primed ready for glueing to Hypalon or PVC fabrics.

Download full Mounting Instuctions PDF

 

 

MATERIALS NEEDED

• The Correct Two Part Adhesive & Appropriate Solvent Cleaner /Primer
• Small Glass or Metal Container
• Cut Down Paint Brush
• Masking Tape
• Knife Handle or Rounded Piece Of Hardwood

Before you start any glueing please note your work place needs to be well ventilated, warm and dry. If the air is humid don’t try to use the adhesive as it will bloom. Hygronometry 60%, temperature between 18 and 25c.
DO NOT USE A GAS FIRE OR NAKED FLAME HEAT SOURCE AS THE SOLVENT ARE HIGHLY FLAMMABLE.