Two davit fittings are bolted onto the swim platform or transom of the main vessel, the rubber pads are attached to the outer side of the tender, two attachment hooks are inserted into the rubber pads and these then clip into a locked position on each davit, allowing the tender to be tilted into a vertical position at 90deg.

Manufactured from high grade stainless steel with grey (or black) neoprene moulded rubber pads

Not sure if you dinghy is PVC or Hypalon?
Check out PVC/Hypalon Guide on the 'Installation' pages here

RBD100 SNAP DAVIT - SWIM PLATFORM FIT

For Boxed kit for boats with a swim platform:
For dinghy weights up to 200lbs / 90.7KG
2x RP101 Pads (for attachment to the inflatable or RIB tender)
2x RSH 120 Hooks
2x swim platform mounted Snap Davits
Available in grey (or black subject to availability)

Installation & Boat Fit Guide is available here

Option to include 'Quick Fit' Kit - enabling temporary removal of davits from the swim platform

Buy a complete 'Snap Davit Kit' and get
FREE DELIVERY
FREE ADHESIVE
PLUS
10% Discount off all additional accessories.

RBD150 SNAP DAVIT - TRANSOM MOUNT

Boxed kit for boats without a swim platform:
For dinghy weights up to 200lbs / 90.7KG
2x RP101 Pads (for attachment to the inflatable or RIB tender)
2x RSH 120 Hooks
2x transom mount Snap Davits
Available in grey (or black subject to availability)

Installation & Boat Fit Guide is available here

Option to include 'Quick Fit' Kit - enabling temporary removal of davits from the swim platform

RBD100 - REAR ARC - SWIM PLATFORM FIT

For dinghy weights up to 250lbs / 113.4KG
Snap Davits for soft or hard bottomed inflatable dinghies, highly effective in transferring the weight of Transom to the Weaver Snap Davits on the swim platform.

Options:
Grey pads or Black pads and a
#1 or #2 size Transom Arc.

Click Here to download Work Sheet

RBD100 - FRONT ARC KIT - SWIM PLATFORM FIT

The Weaver Front Arc is a fully adjustable three point mounting pad unit that glues to fiberglass floor of inflatable dinghies. highly effective in transferring the weight of inflatables to the Weaver Snap Davits.

For dinghy weights up to 250lbs /113.4KG
Boxed kit for boats with a swim platform comprises:
1x Front Arc for hard bottom dinghy
1x RP101 Pad (for attachment to the inflatable or RIB tender)
2x RSH 120 Hooks
2x swim platform mounted Snap Davits

RBD 201- WEAVER FRONT& REAR ARC DAVIT SYSTEM

For hard bottom dinghies, weights up to 300lbs / 136KG
It includes the Front Arc, 2 davit heads, and the rear Transom Arc. Over the years inflatables have become heavier as outboard motors have increased in size and weight. The Arc is designed to transfer the weight from the transom of the inflatable to the swim platform. Made of rugged stainless steel, the Arc is built to be removed when not in use. Its simple receiver release pin allows for easy removal and storage when not in use.

Click Here to download Work Sheet & Installation Guide.

RDB 100 - EXTENDED DAVIT HEADS - SWIM PLATFORM

Extended davit heads are used for Swim Platform mounts where the Platform is curved or there is a need to miss a ladder extension.
3 options available: 2inch, 4inch or 6 inch extended.
Boxed kit for boats with a swim platform comprises:
2x RP101 Pads (for attachment to the inflatable or RIB tender)
2x RSH 120 Hooks
2x transom mount Snap Davits
Available in grey (or black subject to availability

See - Boat / Fit Guide

RBD100 - 4" RAISED DAVIT HEADS - SWIM PLATFORM

Raised davit heads are used for Swim Platforms which are too low for a normal hookup.
4" raised head boxed kit for boats with a swim platform comprises:
2x RP101 Pads (for attachment to the inflatable or RIB tender)
2x RSH 120 Hooks
2x transom mount Snap Davits
Available in grey (or black subject to availability)

See - Boat / Fit Guide

RBD100 - OFFSET HEADS - SWIM PLATFORM FIT

4" out 4" down offset davit head. For high platform
Boxed kit for boats with a swim platform comprises:
2x RP101 Pads (for attachment to the inflatable or RIB tender)
2x RSH 120 Hooks
2x swim platform mount offset head Snap Davits
Available in grey (or black subject to availability

Option to include 'Quick Fit' Kit - enabling temporary removal of davits from the swim platform

SNAP-UPS DAVITS ( New from Weaver! )

Snap Ups! They have a 12" drop for hooking up a dinghy from a high swim platform and lifting it out of the water to a 3" drop below the swim platform so the dinghy doesn't fill up with water.

If you have any questions about this
please give us a call +44(0)1492 583 322